Robustel M1000 Pro V2 Guia do Utilizador descarregar pdf (Página 15)

Robustel GoRugged M1000 Pro V2 User Guide

RT_UG_M1000 Pro V2_v.2.0.0 19.11.2013 14 / 69

Confidential

RSSI LEDs

Function

None

No signal or SIM card not installed properly

1 bar (Only the first LED is on)

Weak or insufficient signal (SMS only)

2 bars (The first and the second LED are on)

Average signal (GSM/GPRS/UMTS connections)

3 bars (All the RSSI LEDs are on)

Exceptional signal (GSM/GPRS/UMTS connections)

The first and the second LED are blinking every 1 second

PIN code error

The third LED is blinking every 1 second

PIN code error and need to use PUK code to unlock it

The second LED is blinking every 1 second

No SIM card or SIM card not installed properly

The third LED is blinking every 1 seconds

Wireless module communication error, no AT

command response.

The first and the third LED are blinking every 1 second

Cannot register to network or SIM card is unavailable

2.3 PIN assignment

2.4 Install SIM Card

Be sure to insert a SIM card before you use the gateway.

Note: A SIM card set with PIN code cannot be used normally in the gateway without the correct PIN code.

Make sure to disconnect the adapter and switch off your gateway before inserting or removing your SIM/USIM card.

DB9 Female Connector

RS232

RS485 (2-wire)

Direction

Data+ (A)

RXD

M1000 Pro V2  Device

TXD

Device  M1000 Pro V2

GND

Data- (B)

RTS

Device  M1000 Pro V2

CTS

M1000 Pro V2  Device

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 69 70

Comentários a estes Manuais

Sem comentários

Robustel M1000 Pro V2 Guia do Utilizador Página 15

Comentários a estes Manuais

Manuais e produtos relacionados com Gateways/controladores Robustel M1000 Pro V2