
Robustel GoRugged R3000 Lite User Guide
RT_UG_R3000 Lite_v.1.0.0 23.12.2013 69 / 113
Confidential
Set the IP pool end IP address which will assign to the L2TP clients.
Show L2TP Server
Advanced
Tick to show the L2TP server advanced setting.
Address/Control
Compression
Used for PPP initialization. In general, you need to enable it as default.
Protocol Field
Compression
Used for PPP initialization. In general, you need to enable it as default.
One of the L2TP initialization strings. In general, you don’t need to modify this
value.
Maximum Receiving Unit. It is the identifier of the maximum size of packet,
which is possible to receive in a given environment.
Maximum Transmission Unit. It is the identifier of the maximum size of
packet, which is possible to transfer in a given environment.
Specify the interval between L2TP client and server.
To check the connectivity of a tunnel, the client and server regularly send PPP
Echo to each other. If the client or server receives no response from the peer
within a specified period of time, it retransmits the PPP echo. If it receives no
response from the peer after transmitting the PPP echo for max retries times,
it considers that the L2TP tunnel is down and tries tore-establish a tunnel with
the peer.
Link Detection Max
Retries
Specify the max retries times for L2TP link detection.
You can enter some other PPP initialization strings in this field. Each string
can be separated by a space.
Click “Add” to add a route rule from L2TP server to L2TP client.
3.23 Configuration -> PPTP
This section allows users to set the PPTP parameters.
Comentários a estes Manuais