Robustel M1000 Pro V2 Guia do Utilizador descarregar pdf (Página 16)

Robustel GoRugged M1000 Pro V2 User Guide

RT_M1000 Pro V2_UG_v01.00 23.11.2012 15 / 49

Confidential

2.4 Installation the SIM Card

Be sure to insert a SIM card before you use the gateway.

Note: A SIM card set with PIN code cannot be used normally in the gateway. You need to use DTU Configurator to

unlock the PIN code of the SIM card first.

Make sure to disconnect the charger and switch off your gateway before inserting or removing your SIM/USIM card.

 Inserting SIM Card

1. Make sure your charger is disconnected.

2. Use a screwdriver to unscrew the screw on the cover, and then remove the cover, you could find the SIM Card

slot.

3. Insert the SIM card, and you need press the SIM card with your fingers until you hear “a cracking sound”. Then

use a screwdriver to screw the cover.

 Removing SIM card

1. Make sure your charger is disconnected, and then press and hold down the power key until the gateway is

powered off.

2. Press the SIM card until you hear “a cracking sound”, when the SIM card will pop up to be pulled out.

Note:

1. Don’t forget screw the cover for again-theft.

2. Don’t touch the metal surface of the SIM card in case information in the card is lost or destroyed.

3. Don’t bend or scratch your SIM card. Keep the card away from electricity and magnetism.

4. Make sure to disconnect the power source from your gateway before inserting and removing your SIM card.

 

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 49 50

Sem comentários

Robustel M1000 Pro V2 Guia do Utilizador Página 16